Ice machines have always been indispensable equipment in industrial production and commercial fields. From the initial manual ice making to the modern automated ice making machine, its development has undergone decades of change. However, with the continuous advancement of technology, people’s demand for ice machines is also changing. In this article, BOLANG will explain the safety operation procedures of .
First of all, check before opening the ice machine:
1, check whether there is debris in the ice machine;
2 Check whether the ice machine pump, water tank and electrical device are in good condition;
- Check that the pipes in the ice machine are unobstructed;
4. Check whether the valves of the water system and energy system are open.
Second, boot
1, open the skate reducer and pump;
2. Open the liquid supply stop valve of the ice machine to supply liquid to the ice machine;
3. Shut down
1. Close the liquid supply stop valve of the ice machine and stop the liquid supply;
2, and then delay first shut down the pump and then shut down the skate reducer
4. Precautions
1, the use of ice machine reducer can not stop at will, to prevent the ice bucket on the formation of large pieces of ice and damage to the equipment;
2, in the operation shall not be free to reach out to touch the depth of the ice mouth, to avoid machine injury;
3. The ammonia pump and compressor corresponding to the ice making system should also be opened accordingly when the ice maker is used;
4. Check ice making, equipment and water system on time during operation to ensure no leakage;
5. Oil should be released to the ice making system on time to achieve the best ice making effect
6. When entering the ice machine for maintenance, the power supply should be removed, and there should be special supervision outside.
The above isBOLANG’s summary of the safe operating procedures for the use of ice machines.
BOLANG is a professional ice machine manufacturer, looking forward to working with you!
Post time: Jan-10-2024
